Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Kind Shock eTen i
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
SunRace CSMS3
- 10 Speed wide ratio cassette - Alloy spiders - Steel lockring - Fits Shimano/SRAM freehub - 448g (11-42); 414g (11-40)
SunRace CSMX80
- 11 speed wide range cassette - 7075 Aluminum largest two sprockets - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 563g (11-50t)
SunRace MFM300
- Steel cogs - Composite spacers
AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
Hayes HFX-Mag/-9 Sole Master Cylinder C-Clip
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
Hayes HFX-Mag/-9 Sole Master Cylinder Retaining Washer
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Wolf Tooth Components 25mm B-Screw
$1.00
- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs
KMC 415H Connecting Link
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
KMC Half Link Adapter
$1.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Ergon GA End Plugs
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
Ergon GP, GS and GC Plug Set
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
Hayes HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
TRP Flat Mount Rear Caliper Mounting Bolt
$1.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
KMC 415H-OL Chain Connector
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
Odyssey Gyro G3 Detangler Upper Top Plate
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Race Face Alloy Crank Spindle Spacer
$2.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Hope Reservoir Cap Screw Brake Lever
$3.00
Replacement reservoir cap screw for Hope brakes.
SRAM BB30 Spacer - 15.46mm
$3.00
BB30 Spacer - 15.46mm
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Shimano Di2 E-Tube Dummy Plug
$3.00
Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each
Shimano Ultegra 6800 Front Derailleur Cable Fixing Assembly
$3.00
Shimano Front Derailleur Cable Fixing Assembly
Wheels Manufacturing Inc. Flat Head Screw
$3.41
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Wheels Manufacturing Inc. Socket Head Screw
$3.41
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Jagwire Basics Derailleur Cable
$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Page 1 of 151 Next page